Handled Squeegees

TITAN SQUEEGEE

The Titan is made with the same plastic used to make bullet proof glass. This allows more strength and rigidity. The overall length is 14 3/4” which a llows a longer reach for rear windows and its unique design will easily lift inner and upper door seals.  Read More

T2143 SHORT-CUT

Short-Cut is a revolutionary tool designed for reaching deep in to the window edge past the dot matrix. Extraordinary rigidity, excellent grip, but st ill nice and compact.  Read More

THE BULLDOZER I- AUTOMOTIVE

Allows you to get to those hard to reach areas, such as behind speakers, brake lights, low angles and rear windows. Features a 6” squeegee blade and i s 15” in overall length.  Read More

THE BULLDOZER II- FLAT GLASS

Features reinforced ribs on the back side for extra rigidity and leverage. Includes 6” squeegee blade and is 15” in overall length. The Bulldozer Sque egees have a new rubber compound for less slip resistance, a flatter blade for better water extraction and added plastic under the blade corners for additional strength.  Read More

Slim Foot

Modeled after the Big Foot Squeegee, the Slim Foot has a slender design that can reach into tighter openings. This no rib squeegee helps reach behind  brake lights and has a rubber grip for secure handling. Measures 15” from blade tip to handle end.  Read More

8” SILVER SECURITY SQUEEGEE

Comfortable, ergonomic handle is designed especially for security film installation. Comes equipped with the T041 blade. Curved handle applies more pr essure to surface, reducing fatigue and ensuring easier, better installations. Blade is replaceable with either the Security Squeegee (T041), Flatfoot (T059), Pro Squeegee(T061), or Orange Crush (T259)blades.  Read More

8" SILVER SECURITY SQUEEGEE BLADE

Standard replacement blade for T042.

6” PRO SQUEEGEE DELUXE

An installation squeegee as a ready-to-use assembly. Used to remove application solution during the installation of all flat glass film types.

6” PRO SQUEEGEE BLADE

Replacement blade to Pro Squeegee Deluxe (T062) used as a means of removing application solutions from beneath the film during the installation of all  flat glass film types. Square edge.  Read More

6” FLATFOOT SQUEEGEE BLADE

Specially angled blades for the Pro Squeegee Deluxe (T062). The angle is designed to maximize the surface area in contact with the film, thereby remov ing much more mounting solution than a standard Pro blade with a square edge. Beveled edge.  Read More

8” PRO SQUEEGEE DELUXE

An installation squeegee as a ready-to-use assembly. Used to remove application solution during the installation of all flat glass film types.

8” PRO SQUEEGEE BLADE

Replacement blade to Pro Squeegee Deluxe (T064) used as a means of removing application solutions from beneath the film during the installation of all  flat glass film types. Square edge.  Read More

8” FLATFOOT SQUEEGEE BLADE
Specially angled blades for the Pro Squeegee Deluxe (T062). The angle is designed to maximize the surfa ce area in contact with the film, thereby removing much more mounting solution than a standard Pro blade with a square edge. Beveled edge.   Read More

BLUE MAX SQUEEGEE WITH HANDLE

Ready-to-use installation squeegee. The specially modified Unger handle makes these installation squeegees must haves. The handle is sold separately a s T050A. Replacement blades are available as part number T117A.  Read More

BLUE MAX 5” HAND SQUEEGEE

Installation squeegee for automotive and flat glass applications. Harder than T203; great for water removal.

ANGLED BLUE MAX 5” HAND SQUEEGEE

Installation squeegee for automotive and flat glass applications. Harder than T203, these tools are excellent for water removal.

SQUARE BLUE MAX 5” HAND SQUEEGEE

Ideal for installing security film.

SQUARE BLUE MAX-NARROW

"Replacement Blade for T1006 Thor’s Hammer."

8" BLUE MAX SQUEEGEE

The favored Blue Max installation squeegee is now available in 8” making it perfect for flat glass installs! Use this blade in the 8” Fusion Handle (T 1046) for great water extraction.  Read More

Under (SCREW) Handle

A modified Unger handle that has proven results for maximum water extraction. For flat glass applications use with the new Extruder channels (T252 &am p; T253). This handle also works excellent with the Super Clear Max, Blue Max and Orange Crush Squeegees.  Read More

Under Pro Handle

For use with the T053, T054, T055 or T056 stainless steel channels with black rubber for cleaning or blue replacement blades(T118) for installation.

"UNGER ERGOTEC (SPRING) HANDLE"

Features a spring mechanism for quick blade changing and a finger indent on the top of handle for complete control. For use with T053, T054, T055 or T 056 channels with black rubber for cleaning or blue(T118) for installation.  Read More

6” Extruder Channel

This channel works in your existing Unger handle or the T050A. It is designed to give your squeegee blade added stiffness and a better angle to aid in  laying down the film and extracting more water per squeegee pass.   Read More

8” Extruder Channel

The Extruder comes with an integrated lip that the Unger handle jaw slides into making a positive connection between handle and channel/blade combo. T he channel also extends further onto the surface of the blue max material which adds stiffness to the blade. Finally, the channel clamps into the handle in such a way that places the blade at a slightly better angle to the handle for better extraction capabilities.  Read More

6” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning proce ss and in the final cleanup after the film installation to remove soap streaks or smudges.  Read More

8” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning proce ss and in the final cleanup after the film installation to remove soap streaks or smudges.  Read More

12” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning proce ss and in the final cleanup after the film installation to remove soap streaks or smudges.  Read More

18” SQUEEGEE & CHANNEL

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (T050 or T050E). Used in the flat glass cleaning proce ss and in the final cleanup after the film installation to remove soap streaks or smudges.  Read More

140” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

12” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

18” SQUEEGEE BLADE

Replacement blades for Unger squeegee channel. Use for window cleaning, not installation.

120” FUSION BLUE CHANNEL REFILL

Fusion Orange Channel squeegee is 85 durometer and Fusion Blue Channel Squeegee is 94 durometer. Easily cut the roll to the channel.

120” FUSION ORANGE CHANNEL REFILL

Fusion Orange Channel squeegee is 85 durometer and Fusion Blue Channel Squeegee is 94 durometer. Easily cut the roll to the channel.

UNGER 36” HARD REPLACEMENT BLADE

Hard replacement rubber is ideal for warmer working conditions and for optimum liquid removal on large, flat surfaces.

SUPER CLEAR MAX SQUEEGEE WITH HANDLE

Ready-to-use installation squeegee. The specially modified Unger handle makes these installation squeegees must haves. The handle is sold separately a s T050A. Replacement blades are available as part number T203A.  Read More

Super Clear Max Squeegee Blade

ANGLED SUPER CLEAR MAX SQUEEGEE BLADE

Softer version of the Blue Max Squeegee, more flexible for back window installations.

Side Swiper Handle Only

SIDE SWIPER WITH BLADE

A great tool for the lower edge of rear windows and behind brake lights. Use 6” of T118, T2107 or T2108 as a replacement blade.

6" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channel s (pg.6).  Read More

8" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channel s .  Read More

12" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channel s   Read More

18" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channel s   Read More

120" BLUE SQUEEGEE REFILL

Use in the Unger squeegee channel as a finishing squeegee for maximum water removal. Replacement bladefor T207. Use with T252 or T253 Extruder Channel s.  Read More

WHALE TAIL SQUEEGEE

Great for getting behind brake lights and back window applications.

WHALE TAIL REPLACEMENT BLADE

Replacement Whale Tail Squeegee blade.

WHALE TAIL HANDLE

THE REACH

This tool is designed to effectively squeegee water from the most difficult places to reach. THE REACH allows you to squeegee water from the bottom of  the back window or windshield with ease. THE REACH is made with a special formulated plastic and rubber in order to achieve the necessary stiffness and durability of its four edges. This tool is 16 3/4 inches in length, and built with a double rubber blade on each side. One side of the tool provides an excellent grip, while the other side uses both edges to squeegee the water out; one pushes the water and the other drags the water. This tool is completely adaptable with two different radiuses of curvature at each side; in other words, one side is stiffer than the other.  Read More

Fusion Auto Stretch Handle Sold separately

FUSION FORCE GRIP

A speciality handle made for pushing attachment systems into proper placement.

THOR'S HAMMER

Use for 6-mil+ safety film installations, and final pass on slow drying thin films. (Flat Glass Applications). Use T117C as a replacement blade.

8" FUSION HANDLE

Ideal handle for all residential and commercial applications. Holds the 8” Orange Crush Squeegee Blade (T259) and 8” Blue Max Squeegee Blade (T117-8).

5" FUSION HANDLE

These handles are designed to optimize your leverage in removing mounting solution. Great for high performance automotive films and smaller residentia l windows. These handles accommodate the Orange Crush, Blue Max and Super Clear Max Squeegees.  Read More

5" FUSION HANDLE-SHORT HANDLE

These handles are designed to optimize your leverage in removing mounting solution. Great for high performance automotive films and smaller residentia l windows. These handles accommodate the Orange Crush, Blue Max and Super Clear Max Squeegees.  Read More

5” FUSION SHORTY HANDLE

A revised version of the T1058-5” Fusion Short Handle. This version is without the collar around the top of the handle. Designed to optimize your leve rage in removing mounting solution. Holds any of the 5” squeegee blades. Great for high performance automotive films and smaller residential windows.  Read More

Performax Handle

Ideal for water extraction when used with T117, T117B, T203 or T257. Features a socket that accepts standard broom or paint roller extensions. This al lows installers to get more leverage.  Read More

5" ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used a lone.  Read More

5" CROPPED ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used a lone.  Read More

8" ORANGE CRUSH

These blades help expel water while keeping their strength. The Orange Crush conforms to curved glass. Blades fit into a handled grip or can be used a lone.  Read More

5” CLEAR CRUSH SQUEEGEE

The Clear Crush is a squeegee blade designed for users that prefer the flexibility of a soft squeegee but the stiffness of a harder squeegee. This bla de is the best of both worlds. Soft enough to squeegee curved surfaces without having to apply too much pressure but stiff enough to push or pull solution away from the job at hand.  Read More

5” CROPPED CLEAR CRUSH SQUEEGEE

The Clear Crush is a squeegee blade designed for users that prefer the flexibility of a soft squeegee but the stiffness of a harder squeegee. This bla de is the best of both worlds. Soft enough to squeegee curved surfaces without having to apply too much pressure but stiff enough to push or pull solution away from the job at hand.  Read More

STROKE DOCTOR

Designed with an I-beam construction handle that features an ergonomic slip-resistant grip and longer blade to apply squeegee pressure more evenly in  the most hard to reach places.  Read More

STROKE DOCTOR REPLACEMENT BLADE

FUSION BLUE STROKE BLADE

Fusion Blue and Orange Stroke Blades fit the Stroke Doctor handle (T1022). Blue is 94 durometer while the Orange is softer at 85.

FUSION ORANGE STROKE BLADE

Fusion Blue and Orange Stroke Blades fit the Stroke Doctor handle (T1022). Blue is 94 durometer while the Orange is softer at 85.

Blue Go Doctor

Blade(Firm) Use for window film and auto wrap installs.

Yellow Go Doctor

Blade(Flex-Firm) Use for window film, auto wrap, vinyle graphics and paint protection installs.

Red Go Doctor Blade Blade(Soft)

Handled Squeegees Use for window film, auto wrap, vinyle graphics and paint protection installs.

Go Doctor Blue

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in yo ur hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.  Read More

Go Doctor Yellow

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in yo ur hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.  Read More

Go Doctor Red

A fully integrated squeegee system where all of its components have been designed together, to work together. The I-beam handle fits comfortably in yo ur hand. Go Doctor's unique frame construction was specifically designed to transfer more of your energy to the blade's point-of-contact for greater efficiency and reduced installer fatigue. The I-beam handle is wrapped with a comfortable, non-slip material that provides secure grip. Go Doctor incorporates a quick-change blade system for speedy on the job replacements.  Read More

DUAL DENSITY GO DOCTOR REPLACEMENT BLADE

Replacement blade for any Go Doctor Handle. Get two blades for the price of one. The Dual Density blade is double sided and reversible. 85A RED, 95A B LUE.  Read More

Ceramic Safety Film Cutte

Designed to deliver rapid, precise cuts for thick gauge safety films. It is intended for precision pre-cutting on flat, square-edged tables.

YELLOW – Grip-N-Glide Yellow

New Grip-N-Glide combines an ergonomic hand grip with high performance, interchangeable blades to give you just what you need for tint, wrap and PPF i nstallations.  Read More

ORANGE – Grip-N-Glide Orange

New Grip-N-Glide combines an ergonomic hand grip with high performance, interchangeable blades to give you just what you need for tint, wrap and PPF i nstallations.  Read More

GRIP-N-GLIDE YELLOW REPLACEMENT BLADE (FLEX-FIRM)

Unlike tube squeegees with their beltsanded round edges, the Grip-N-Glide features a .24” thick squeegee blade with French edges that are machine mill ed for maximum water extraction. Use either the firm yellow 90A or softer orange 85A blade to meetyour application needs. The blades fit snugly into a frame that is covered by a substantial handgrip designed with comfortable finger grooves and a special surface texture to provide the ultimate control in either wet or dry use.  Read More

GRIP-N-GLIDE ORANGE REPLACEMENT BLADE (SOFT)

Unlike tube squeegees with their beltsanded round edges, the Grip-N-Glide features a .24” thick squeegee blade with French edges that are machine mill ed for maximum water extraction. Use either the firm yellow 90A or softer orange 85A blade to meet your application needs. The blades fit snugly into a frame that is covered by a substantial handgrip designed with comfortable finger grooves and a special surface texture to provide the ultimate control in either wet or dry use.  Read More

Gasket Push Stick

Gasket Push Stick

5” FUSION STRETCH HANDLE

The Fusion Stretch handle is the latest design for installing flat glass and security films. These handles come in both 5” & 8” widths. This handl e features a 14 ½” metal extension and two rubber grip sections for maximum water removal.  Read More

8” FUSION STRETCH HANDLE

The Fusion Stretch handle is the latest design for installing flat glass and security films. These handles come in both 5” & 8” widths. This handl e features a 14 ½” metal extension and two rubber grip sections for maximum water removal.  Read More

5” YELLOW FLAT OUT BLADE

The Yellow Flat Squeegees are available in both 5” and 8” length. Slightly harder than the Orange Crush and comparable in hardness to the Blue Max pro ducts they work great in flat glass and security applications. For best results try in a Fusion Handle, Fusion Stretch series or Thor’s Hammer.  Read More

8” YELLOW FLAT OUT BLADE

The Yellow Flat Squeegees are available in both 5” and 8” length. Slightly harder than the Orange Crush and comparable in hardness to the Blue Max pro ducts they work great in flat glass and security applications. For best results try in a Fusion Handle, Fusion Stretch series or Thor’s Hammer.  Read More

5” BIG MOUTH 3/8” THICK SINGLE BEVEL SQUEEGEE BLADE

The 3/8” thick blades are ideal for thick security films, graffiti films, hurricane / bomb blast films, and windshield protection films. It is a much  stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of tha installer. This version has beveled edge. Use with a big Mouth Handle.  Read More

8” BIG MOUTH 3/8” THICK SINGLE BEVEL SQUEEGEE BLADE

The 3/8” thick blades are ideal for thick security films, graffiti films, hurricane / bomb blast films, and windshield protection films. It is a much  stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of tha installer. This version has beveled edge. Use with a big Mouth Handle.  Read More

5” FUSION BIG MOUTH STRETCH HANDLE

If you want to get optimum use your Big Mouth Blade, use with the 5” Fusion Big Mouth Stretch Handle. The 14½ extended handle is texturized with dual  grips for maximized leverage. One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8” Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool.  Read More

8” FUSION BIG MOUTH STRETCH HANDLE

If you want to get optimum use your Big Mouth Blade, use with the 8” Fusion Big Mouth Stretch Handle. The 14½ extended handle is texturized with dual  grips for maximized leverage. One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8” Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool. leverage. One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8” Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool.  Read More

8” FUSION BIG MOUTH HANDLE

The 8” Fusion Big Mouth Handle features brass inlaid screw threads and stainless steel screws. This handle is designed to hold a 3/8” thick squeegee.  One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8” Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool.  Read More

5” FUSION BIG MOUTH HANDLE

The 5” Fusion Big Mouth Handle features brass inlaid screw threads and stainless steel screws. This handle is designed to hold a 3/8” thick squeegee.  One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8” Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool.  Read More

5” RED LINE EXTRACTOR 1/4” THICK DOUBLE BEVELED SQUEEGEE BLADE

5” RED LINE EXTRACTOR 1/4” THICK SINGLE BEVELED CROPPED SQUEEGEE BLADE

Is 5” wide, 1/4” thick with a single bevel and cropped sides.

5” RED LINE EXTRACTOR 1/4” THICK NO BEVELED SQUEEGEE BLADE

Is 5” wide, 1/4” thick with no bevel. This allows you 4 working edges.

8” RED LINE EXTRACTOR 1/4” THICK DOUBLE BEVEL SQUEEGEE BLADE

Is 8” wide, 1/4” thick with a double bevel.

8” RED LINE EXTRACTOR 1/4” THICK NO BEVELED SQUEEGEE BLADE

Is 8” wide, 1/4” with no bevel.

5” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE

The 3/8” thick blades are ideal for thick security films, graffiti films, hurricane / bomb blast films, and windshield protection films. It is a much  stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of tha installer. Use with a Big Mouth Handle.  Read More

8” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE

The 3/8” thick blades are ideal for thick security films, graffiti films, hurricane / bomb blast films, and windshield protection films. It is a much  stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of tha installer. Use with a Big Mouth Handle.  Read More

Magnun Red Line Squeegee Blade 

Squeegee blade designed for
heard-to reach rear windows and
tight decks in rear windows. Pair
this blade with a Fusion Auto
Strecht for th e best combination
available in the industry  Read More

FUSION HANDEE TOOL

The Fusion Hand Dee Tool is a MAGNETIC handle that can accommodate any 5” squeegee. Equipped with a removable “jaw” and a rounded grip to fit perfectl y in your hand.  Read More

5" Cropped Pink Clean Squeegee

Pink Clean is a 5” Cropped squeegee blade. Pink Clean is the softest blade from Fusion Tint Tools. This blade is specifically designed with cleaning i n mind. It is recommended to use the Pink  Read More